EdgeX

Position your brand as a trendsetter in today’s market.

EdgeX is a member of the FlexStyle family with beveled edges for a sharper, more refined look. This is our most durable emblem we’ve made to date, and is specifically made for hard goods, hats, and heavy duty garments – such as outerwear.

Like the rest of the FlexStyle family, EdgeX is offered in metallic and non-metallic options. This new product also offers unparalleled flexibility, with heat-seal and pressure sensitive applications to adhere to a variety of surfaces. Don’t forget your FlexStyle® Silicone Pad – this is used to protect the integrity of your FlexStyle emblem.

Gallery

The imagery and designs used in this page are intended to demonstrate the effects that can be achieved with our products and not imply that the designs have been supplied to or endorsed by their owners.

For technical & application click here! Advantages of FlexStyle Emblems

Additional Information & Benefits

Beveled edges
Perfect for hard goods and thicker materials
Durable, thicker emblem

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.

For technical & application information please visit www.worldemblem.com/technical

Need Some Help?

From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Give us a call or start a live chat below.

Start a Live Chat

Top and Bottom Heat

Top Heat Only

Application Instructions: Garments

Pre-heat bottom platen 10-15 times, 12 seconds each time. If using a machine that uses ONLY top heat, this just needs to be done once.
Mount the garment. Make sure the garment is wrinkle-free. Pre-heat for 12 seconds.
Place the emblem with the adhesive facing down. There should only be one layer of fabric between the emblem and the platen.
Place one FlexStyle® Silicone Pad on top of the emblem. The sheets should cover the entire area where the top platen will make contact. Make sure to use different sheets for dark colored garments and for light colored garments.
Activate the Heat Press. Let the cycle finish. If the machine is manual, make sure to pull the lever as soon as the machine beeps.
Remove the carrier when the emblem has cooled down. It usually takes 2 – 3 minutes to cool. If any corners of the emblem peel off, the application was not done correctly.
Check the integrity of the emblem. The raised areas should stay raised, textures should be visible. There should be a strong bond with the fabric.

Top Platen Temperature	360° F
Bottom Platen Temperature	320 – 330° F
Pressure	Medium – Low (20 – 40 Psi)
Time	10-12 Seconds
Wash	Domestic

Application Instructions: Hats

Pre-heat mold 10-15 times, 12 seconds each time. This is done only once without the hat mounted so the silicone rubber pad stays hot throughout the application process.
Mount the hat with the headband inside of the cap pulled out. Depending on the location, the hat must be mounted using the ‘stretcher’ located on the bottom of the heat press. Make sure there is no space between the mold and hat.
Using a FlexStyle® Silicone Pad, pre-heat the hat for 12 seconds.
Place emblem on hat using thermal tape.
Place one silicone rubber sheets on top of the emblem. The sheets should cover the entire area where the platen will make contact. Make sure to use different sheets for dark colored garments and for light colored garments.
Pull down lever to activate the press. When press beeps, pull up lever quickly.
Remove carrier when emblem has cooled down. It usually it takes 2-3 minutes to cool.
Check the integrity of the emblem. The raised areas should stay raised, textures should be visible. There should be a strong bond with the fabric.

NOTE: Top & bottom heat presses are designed for applying patches, while top heat only heat presses are designed for applying transfers. Please check out the World Emblem YouTube Channel or our Video page for step by step instructions for applying all of our apparel decorations. FlexStyle is also available with pressure sensitive backing so you can stick it to a hard surface like a sticker. The FlexStyle samples with the brown paper backing are pressure sensitive and those with white backing paper are heat sealable.

EdgeX

Gallery

The imagery and designs used in this page are intended to demonstrate the effects that can be achieved with our products and not imply that the designs have been supplied to or endorsed by their owners.

Additional Information & Benefits

Need Some Help?

Top and Bottom Heat

Top Heat Only

Application Instructions: Garments

Application Instructions: Hats

About

Resources

Connect

Contact