PV+ AirDome

Emblem Size Limits

Minimum – 0.5"W x 0.5"
Maximum – 4" x 4"

Text and Elements

Minimum size - 0.8 mm

Floating Elements

All PV+ Emblems must have a uniform background that supports every letter and element. Floating elements are not allowed.

Sewing Channel

PV+ Emblems can have a channel for seam application, with the choice of adding a 1 or 2mm outline (for the sewing channel) and a 2mm edge to the design.

Color

A maximum of 4 colors can be used on a single PV+ Emblem to remain within standard turn-times. Please note that any designs with 5-8 colors will cause a delay on production and turn around times. Available colors include:

• Solid colors, without any gradients *
• "Glow in the dark" color
• Pantone color matching is available

* Metallic and neon colors are not available.

Note: Color match may vary between physical pieces and digital renderings due to natural ink behavior on variant background colors.

Backing

• Heat applied
• Peel & stick
• StormGrip
• Velcro®
  • Velcro® Sewn on standard shape patches
  • Heat applied on custom shape patches

BORDER

• Borderless
• Sewing Guide
  • Note: If “Sewing Guide” is selected with Velcro backing and standard shape, a “Sewing Guide Color” from WE standard thread colors must be selected.
  • Color Options: All WE standard thread colors (except Metallic Gold-29 & Metallic Silver-30).

THICKNESS

• Thin (1.8mm – 2.4mm H)
• Thick (3.9mm – 4.7mm H)

Washing Information

PV+ Emblems will withstand up to 52 domestic washing machine cycles.

HEAT APPLIED BACKING WITH A 360 IQ™ HAT HEAT PRESS - HATS

• Top Temperature: 350°-360° F
• BottomTemperature: 318°-320° F
• Pressure: 40-50 PSI
• Preheat: 17-20 seconds
• Dwell Time: 17-20 seconds
• Instructions: Place hat on heat press, leaving out the inner layer of the cap. Use a FlexStyle® Silicone Pad to protect the patch.

HEAT APPLIED BACKING WITH TOP HEAT & BOTTOM HEAT - GARMENTS

• Top Temperature: 350°-360° F
• BottomTemperature: 318°-320° F
• Pressure: 40-50 PSI
• Preheat: N/A
• Dwell Time: 17-20 seconds
• Instructions: Place patch on desired location and secure it in place with Thermal Tape. . Use a FlexStyle® Silicone Pad to protect the patch.

HEAT APPLIED BACKING WITH A TOP HEAT PRESS - GARMENTS

• Temperature: 310°-335° F
• Pressure: 50-60 PSI
• Preheat: N/A
• Dwell Time: 18-23 seconds
• Instructions: Place patch on desired location and secure it in place with Thermal Tape. Turn garment inside out and heat press. Use a FlexStyle® Silicone Pad to protect the patch.

Disclaimer

World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

Note: Please check out www.youtube.com/worldemblem for step-by-step instructions for applying our apparel decorations.

VELCRO® BACKING (LOOP SIDE) WITH A 360 IQ™ HAT HEAT PRESS – HATS

• Top Temperature: 255°-265° F
• BottomTemperature: 315°-320° F
• Pressure: 60-80 PSI
• Preheat: N/A
• Dwell Time: 15-18 seconds
• Instructions: Place hat on heat press, leaving out the inner layer of the cap. Use a FlexStyle® Silicone Pad to protect velcro®

VELCRO® BACKING (LOOP SIDE) WITH TOP HEAT & BOTTOM HEAT - GARMENTS

• Top Temperature: 255°-265° F
• BottomTemperature: 315°-320° F
• Pressure: 60-80 PSI
• Preheat: N/A
• Dwell Time: 15-18 seconds
• Instructions: Use a FlexStyle® Silicone Pad to protect velcro®

VELCRO® BACKING (LOOP SIDE) WITH A TOP HEAT PRESS - GARMENTS

• Temperature: 315°-325° F
• Pressure: 70-80 PSI
• Preheat: N/A
• Dwell Time: 14-18 seconds
• Instructions: Use a FlexStyle® Silicone Pad to protect velcro®

Disclaimer

World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

Note: Please check out www.youtube.com/worldemblem for step-by-step instructions for applying our apparel decorations.

PEEL & STICK

1. Clean application area with rubbing alcohol
2. Remove paper backing, press emblem firmly on desired location

Discover the perfect colors for your projects. View our Digital Color Chart.

Ready to get started? Shop our Physical Color Chart now.

Proposition 65 requires businesses to provide warnings about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.  These chemicals can be in the products in homes or workplaces, or that are released into the environment.

The CPSIA strengthened children's product safety by establishing critical safety and traceability requirements.

Primarily, CPSIA regulations enforce:

• Rigorous restrictions on phthalates

• Rigorous lead restrictions

• Requires acceptable levels for several substances common in most consumer products, especially those designed for children, ages 0-12.