- 1-800-766-0448
- Log In
Our Plotter Cut Transfers provide a crisp, clean, detailed single-color
design. They stretch with the fabric and can be used for almost any
textile application. Transfers arrive individually pre-cut so they’re easier
to use and they’re wash tested to 25 domestic cycles for durability.
Available in your choice of Silicone or Polyurethane.
TRANSFERS SIZE LIMITS
Min – 0.5”W X 0.5”H
Max – 12.00”W X 12.00”H
TEXT AND ELEMENTS
The minimum width for the typography in this category is 0.8mm.
It is recommended to have a space of minimum 0.8mm between each
letter and 1mm separation for internal elements of the typography.
BACKING
This product is available with Low Melt backing.
COLOR
Only solid colors are available, without any gradients.
ELECTRONIC PROOF
1 Day
PRODUCTION TIME
25-250pcs: 2 days
251-500pcs: 3 days
1 additional day for every 250pcs
WASHING INFORMATION
Plotter Cut Transfers will withstand up to 25 domestic washing machine cycles.
SHELF LIFE
To maximize the shelf life of this product please keep at room temperature. Do not expose it to temperatures above 485°.
DISCLAIMER
World Emblem recommends testing the best combination of heat seal
parameters before application. World Emblem is not liable for any
damages to garments during the application process.
Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.
Revised 08.17.22
|
LOW MELT ON GARMENTS - TOP HEAT SILICONE & POLYURETHANE (PU) |
|
| Top Heat | 290° F - 302° F |
| Pressure | Medium High (50 - 60 Psi) |
| Dwell Time | 10 - 15 Seconds |
| Peel | Cold |
|
LOW MELT ON HATS - IQ 360 HAT HEAT PRESS POLYURETHANE (PU) |
|
| Top Heat | 310° F - 320° F |
| Bottom Heat | 260° F - 270° F |
| Pressure | Medium High (50 - 60 Psi) |
| Dwell Time | 10 - 13 Seconds |
| Peel | Cold |
|
LOW MELT ON HATS - IQ 360 HAT HEAT PRESS SILICONE |
|
| Top Heat | 310° F - 320° F |
| Bottom Heat | 260° F - 270° F |
| Pressure | Medium High (50 - 60 Psi) |
| Dwell Time | 10 - 14 Seconds |
| Peel | Cold |
DISCLAIMER
World Emblem recommends testing the best combination of heat seal
parameters before application. World Emblem is not liable for any
damages to garments during the application process.
NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.
World Emblem also offers a Perfect Print® Sublimation System, allowing you the ability to manufacture your own emblems. Through a secure online catalog, you can produce emblems on-demand and at a fraction of the cost of outsourcing the production. The Perfect Print® Sublimation System includes a printer, software, templates, paper, ink and blanks.
NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.
For technical & application information please visit www.worldemblem.com/technical
From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.