Patch Size

2.5"H x Proportional W"

Backing

• Low melt heat seal - Heat Applied
• Pressure Sensitive - Peel & Stick

Stock Designs

• Alphabet: Letters A - Z
• Numbers: 0 - 9

Materials

• White Chenille Thread with Gold Glitter Felt Border

Limitations

Low melt - Not recommended for use on materials that may be heat sensitive (ex: some nylons, silk, some plastics, leather, wool, fleece, etc.) or for weather-treated materials, due to chemicals used that do not allow the emblems to adhere properly.
Pressure-sensitive - Recommended application is on flat, non-textured surfaces, including glass, plastic, wood, and metal. Not recommended for application on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods.

Washing Information

Chenille patches will withstand at least 52 domestic washing machine cycles at 104°F max.

Shelf Life

One year shelf life before applying (room temperature-controlled environment).

Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 06.18.25

LOW MELT BACKING WITH A 360 IQ™ HAT HEAT PRESS - HATS

• Top Temperature: 290°-300° F
• BottomTemperature: 315°-320° F
• Pressure: 40-50 PSI
• Preheat: N/A
• Dwell Time: 14-17 seconds
• Instructions: Place hat on heat press, leaving out the inner layer of the cap. Use a FlexStyle® Silicone Pad to protect the patch.

LOW MELT BACKING WITH TOP HEAT & BOTTOM HEAT - GARMENTS

• Top Temperature: 290°-300° F
• BottomTemperature: 315°-320° F
• Pressure: 40-50 PSI
• Preheat: N/A
• Dwell Time: 14-17 seconds
• Instructions: Place patch on desired location and secure it in place with Thermal Tape. . Use a FlexStyle® Silicone Pad to protect the patch.

LOW MELT BACKING WITH A TOP HEAT PRESS - GARMENTS

• Temperature: 350°-360° F
• Pressure: 40-50 PSI
• Preheat: N/A
• Dwell Time: 15-20 seconds
• Instructions: Place patch on desired location and secure it in place with Thermal Tape. Turn garment inside out and heat press.
• Optional: For delicate fabrics such as nylon, lycra, 100% polyester, etc. use a FlexStyle® Silicone Pad over garment for protection.

DISCLAIMER:

World Emblem recommends testing the best combination of heat seal parameters before application.

World Emblem is not liable for any damages to garments during the
application process.

NOTE:
Please check out youtube.com/worldemblem for step by step instructions for applying our apparel
decoration

PRESSURE-SENTITIVE

1. Clean application area with rubbing alcohol
2. Remove paper backing, press emblem firmly on desired location

Pricing

Using the drop-downs above, you can find the approximate price per item, based on the emblem size and quantity ordered.

Price Includes

Low Melt & Pressure Sensitive Backing