FlexStyle® Signatures are preferred to traditional emblems because they are more innovative than traditional embroidery. The raised 3D effect allows for intricate detail with ability to select any color you'd like with metallic & non-metallic finishes. Clear finish also available. Match any type of garment style or color while providing durability and style. FlexStyle® Signatures are sure to turn heads!
EMBLEM SIZE LIMITS
Area - FlexStyle® Signatures emblems can range from 0.5” x 0.5” to 5.75” x 5.75”; they cannot be any smaller or any larger.
Thickness - Varies depending on the complexity of the design from 2 mm
Product accepts CMYK colors.
RGB and PMS colors may be accepted but color matching is not
guaranteed. Neon, glitter and reflective colors are not available
Low Melt - This backing is more commonly used on wearables and applied
with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard goods.
Low Melt: Since the product is applied with heat, it is not recommended
for use on materials that may be heat sensitive (ex. some nylons, silk,
some plastics, leather, wool, fleece, etc.) Not recommended for weather treated materials, due to chemicals used that do not allow the emblems to adhere properly.
Pressure-Sensitive: The use of these emblems on material surfaces that
may contain an oil finish, such as silicon, TeflonTM, rough fabrics, or any
kind of outdoor goods is not recommended.
A digital sample via email is available in 48 hours. Edits are allowed.
Upon approval, the mold is made in 1 day.
Samples time: 2 days plus shipping.
Production time: 5 days plus shipping (additional day per 500 pieces)
Minimum elements size: 1mm
Minimum size between elements: 1.2 mm
FlexStyle® emblems will withstand at least 25 domestic washing
machine cycles at 104° F max.
1-year shelf life before applying (room temperature controlled
One-time mold charge and artwork fee.
APPLICATION VIDEOS AVAILABLE AT
Make sure the application area is thoroughly cleaned. We recommend the
use of rubbing alcohol. Remove paper backing and press firmly in the
Remove clear top carrier.
LOW MELT BACKING WITH A TOP HEAT PRESS: GARMENTS
LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS
World Emblem recommends testing the best combination of heat seal
parameters before application. World Emblem is not liable for any
damages to garments during the application process.
NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.
From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.