FlexStyle® American Flags

BACKING
Low Melt - This backing is more commonly used on wearables and
applied with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard
goods

LIMITATIONS
Heat Seal: Since the product is applied with heat, it is not
recommended for use on materials that may be heat sensitive (ex.
some nylons, silk, some plastics, leather, wool, fleece, etc.).
Pressure-Sensitive: The use of these emblems on material surfaces
that may contain an oil finish, such as silicon, TeflonTM, rough fabrics, or
any kind of outdoor goods is not recommended.

TEXTURES
FlexStyle® Textured emblems are 100% textured.

WASHING INFORMATION
FlexStyle® emblems will withstand at least 52 domestic washing
machine cycles at 104° F max.

SHELF LIFE
1-year shelf life before applying (room temperature controlled
environment).

Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 03.24.21

APPLICATION VIDEOS AVAILABLE AT
www.youtube.com/worldemblem

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the
use of rubbing alcohol. Remove paper backing and press firmly in the
desired location.
Remove clear top carrier.

LOW MELT BACKING WITH A TOP HEAT PRESS: GARMENTS AND HATS
1. Set the press at 350-360° F for top heat with 40-60 lbs. of pressure.
2. Place the garment on the heat press with the FlexStyle® silicon pad on top
and press for 20 seconds to preheat the garment.
3. Place the FlexStyle® on the garment in the desired location. Place the
FlexStyle® silicone pad over the design.
4. Press for 12-15 seconds.
5. Remove the shirt from the heat press and remove the clear cover once
cooled.

LOW MELT BACKING WITH A BOTTOM HEAT PRESS: GARMENTS & HATS
1. Set the press at 280-300° F for bottom heat with 40-60 lbs. of pressure.
2. Place the patch on the garment in the desired location. Place the
FlexStyle® silicone pad over the design.
3. Press for 10-12 seconds.
4. The FlexStyle® silicon pad protects the garment from scorching as
well as to maintain the texturizing in the design.

DISCLAIMER
World Emblem recommends testing the best combination of heat seal
parameters before application. World Emblem is not liable for any
damages to garments during the application process.